The ROP Shop 2800 PSI Pressure Washer Pump FH, 2.3 GPM, 7/8" Shaft with Chemical Hose & Filter

Product Description

• The ROP Shop replacement Pressure Washer Pump with Chemical Solution Siphon Hose
• Specs - Pump - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16" x 6 3/16" x 6 7/16" & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Chemical Hose - Inner Diameter: 1/4" (6mm). Outer Diameter: 3/8" (9mm). Length: 5'. Material: Rubber. Refer to images 2 and 3 for more information
• Includes - (1) Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, & Outlet Tube and (1) Chemical Solution Siphon Hose with Filter; comes as shown in the first image
• This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress (spacers & longer bolts are NOT included). Hose used to siphon detergent out of a separate container. Filter ensures no contaminants enter the pressure washer pump
• This pump mounts vertical and is a front facing (water inlets/outlets come out of the front of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped. Thermal relief valve comes pre-intalled. This is a sealed unit, no oil maintenance required. Brass outlet tube MUST be removed if useing quick-connect. Please note it is not recommended to run any pump above its max PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury