Genuine OEM Annovi Reverberi 2800 PSI Pressure Washer Pump RMW25G28D-F7-EZ, 2.5 GPM, 7/8" Shaft with Hardware Kit & Spray Kit
Product Description
- Genuine OEM Annovi Reverberi Pressure Washer Pump with Hardware Kit & Spray Kit
- Specs - Maximum Pump Pressure: 2800 PSI. Maximum Pump Flow: 2.5 GPM. Maximum Pump Speed: 3400 RPM. Shaft Size: 7/8". Pump 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" from center to center of each outer hole. Maximum Fluid Temperature: 140° F. Pump Inlet Type: 3/4" GHA. Pump Outlet Type: 22mm x 14mm. Oil Capacity: 2.2oz. Hose Length: 35'. Spray Gun Inlet: M22 Male. Spray Gun Outlet: M22 Female. Lance Length: 18". Lance Inlet: M22 MPT. Lance Outlet: 1/4" Female QC. Nozzle Size: 3.0. Nozzle Type: 0°, 15°, 25°, 40° & Soap. Refer to images 2 and 3 for more information
- Includes - (1) Pressure Washer Pump, (4) Bolts, (4) Lock Washers, (1) 35' Hose, (1) Spray Gun, (1) 18" Extension Lance, (1) 0° Spray Tip - Red, (1) 15° Spray Tip - Yellow, (1) 25° Spray Tip - Green, (1) 40° Spray Tip - White & (1) Soap/Chemical Spray Tip - Black; comes as shown in the first image
- This is a triplex residential plunger pump for vertical gas engine driven pressure washers. This pump mounts directly on to the engine shaft by using a keyed hollow shaft connection system. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines with at least 5.5HP
- This pump, with Easy Start Valve (EZ) and special 4 bolt flange, includes a built-in pressure control valve, and chemical injection system. This pump can accept up to 2 1/2" long shafts. Pump comes complete with installation hardware, hose, spray gun, extension wand, and 5 sprayer nozzle tips
The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let us work together to avoid this! If you are unsure as to whether this is the correct product for your unit, please ask. If you need assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:
Model and/or Sub-model
Spec and/or Type Number
Code and/or Serial Number
Year
Engine Horsepower
Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.
The ROP Shop Staff
We have a detailed guide which includes all the information you'll need to find the perfect replacement. Check out the article and fitment chart here.
If you need any help finding the right pump to fit your needs, please reach out to us at: support@theropshop.com
Yes! Our pumps are installed onto the shaft of the engine with a keyway. If a keyway is pictured in the listing, then it will come with one. You may also purchase a keyway from our shop here.
WARNING: This product can expose you to chemicals including lead, DEHP and/or DINP which is known to the State of California to cause cancer, lead to birth defects and/or other reproductive harm. For more information go to www.P65Warnings.ca.gov. The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.
PRECAUSCION: Este producto puede exponerlo a sustancias químicas, como el plomo, el DEHP, y o el DINP que se conoce en el estado de California como causantes de cáncer, defectos congénitos o otros daños reproductivos. Para obtener más información vaya a www.P65Warnings.ca.gov. Los productos que vendemos no están diseñados para a ser utilizados en sistemas de agua potable y son sólo para aplicaciones industriales de agua no potable.
