The ROP Shop 3100 PSI Pressure Washer Pump, 2.5 GPM, 7/8" Shaft with Spray Kit
Product Description
- The ROP Shop replacement Pressure Washer Pump with Spray Kit
- Specs - Maximum Pump Pressure: 3100 PSI. Maximum Pump Flow: 2.5 GPM. Maximum Pump Speed: 3400 RPM. Pump Shaft Diameter: 7/8" Shaft. Pump 3 Bolt Pattern: 7 11/16" x 6 3/16" x 6 7/16" & 4" Center to Each Outer Hole. Maximum Pump Water Temperature: 140° F. Pump Inlet Connection Type: Standard Garden Hose. Pump Outlet Tube Connection: 22mm Male. Hose Length: 35'. Hose End Types: M22 Female, Threaded. Hose Diameter: 1/4" (6mm). Spray Gun Inlet: M22 male. Spray Gun Outlet: M22 female. Lance Length: 18". Refer to images 2 and 3 for more information
- Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube, (1) 35' Pressure Washer Hose, (1) Front Entry Spray Gun, (1) 18" Extension Lance & (5) Spray Nozzle Tips; comes as shown in the first image
- This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 6HP to handle PSI. Pump head can be flipped. Thermal relief valve comes pre-intalled. This is a sealed unit, no oil maintenance required. Brass outlet tube MUST be removed if quick-connect is being used
- This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress (spacers & longer bolts are NOT included)
- Spray gun features easy access to the M22 male connector in front of the trigger and the M22 female threaded connection accepts wands with M22 connectors. Sprayer tips are 0° (red), 15° (yellow), 25° (green), 40° (white) & Soap (black) nozzles with 3/8" Quick Disconnects
We have a detailed guide which includes all the information you'll need to find the perfect replacement. Check out the article and fitment chart here.
If you need any help finding the right pump to fit your needs, please reach out to us at: [email protected]
Yes! Our pumps are installed onto the shaft of the engine with a keyway. If a keyway is pictured in the listing, then it will come with one. You may also purchase a keyway from our shop here.
We have a detailed guide which includes all the information you'll need to find the perfect replacement. Check out the article and fitment chart here.
If you need any help finding the right pump to fit your needs, please reach out to us at: [email protected]
Yes! Our pumps are installed onto the shaft of the engine with a keyway. If a keyway is pictured in the listing, then it will come with one. You may also purchase a keyway from our shop here.