The ROP Shop 2600 PSI Pressure Washer Pump, 2.4 GPM, 7/8" Shaft with Spray Kit
Product Description
- The ROP Shop replacement Pressure Washer Pump with Spray Kit
- Specs - Pump - Max PSI: 2600. Max GPM: 2.4. Max RPM: 3400. Shaft: 7/8" Short Shaft. Bolt Pattern: 2 5/8" Center to Center & 1 7/8" Center to Each Outer Hole. Max HP: 6.5. Max Temp: 140° F. Inlet: Standard Garden Hose. Outlet Tube: 22mm Male. Oil Capacity: 75 mls (2.5 oz). Keyway - 3/16" x 1/4" x 1 1/8". Spray Gun - Inlet: M22M. Outlet: M22F. Wand - Length: 18". Inlet: M22M. Outlet: 1/4" Female. Hose - Length: 35'. End Types: M22 Female. Diameter: 1/4". Refer to images 2 & 3 for more information
- Includes - (1) Horizontal Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, Outlet Tube, & Oil Cap, (1) Keyway, (1) 35' Hose, (1) Spray Gun, (1) 18" Extension Wand, & (5) Spray Nozzle Tips; comes as shown in the first image
- Uses 75 mls (2.5 oz) of 85W-90 gear oil (NOT included). Has a sight glass to view oil level and a drain plug for a simplified oil changing process. Sprayer tips are 0° (red), 15° (yellow), 25° (green), 40° (white) & Soap (black) nozzles with 3/8" Quick Disconnects. (Cold water use ONLY)
- This pump mounts horizontal (oil cap points up). Pump needs at least 5HP to handle PSI. Pump head cannot be flipped. Thermal relief valve comes pre-installed. Brass outlet tube MUST be removed if quick-connect is being used. Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
We have a detailed guide which includes all the information you'll need to find the perfect replacement. Check out the article and fitment chart here.
If you need any help finding the right pump to fit your needs, please reach out to us at: [email protected]
Yes! Our pumps are installed onto the shaft of the engine with a keyway. If a keyway is pictured in the listing, then it will come with one. You may also purchase a keyway from our shop here.
Proposition 65 WARNING(S)
WARNING: This product can expose you to chemicals including lead, DEHP and/or DINP which is known to the State of California to cause cancer, lead to birth defects and/or other reproductive harm. For more information go to www.P65Warnings.ca.gov. The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.
PRECAUSCION: Este producto puede exponerlo a sustancias químicas, como el plomo, el DEHP, y o el DINP que se conoce en el estado de California como causantes de cáncer, defectos congénitos o otros daños reproductivos. Para obtener más información vaya a www.P65Warnings.ca.gov. Los productos que vendemos no están diseñados para a ser utilizados en sistemas de agua potable y son sólo para aplicaciones industriales de agua no potable.
11 Photo(s)
We have a detailed guide which includes all the information you'll need to find the perfect replacement. Check out the article and fitment chart here.
If you need any help finding the right pump to fit your needs, please reach out to us at: [email protected]
Yes! Our pumps are installed onto the shaft of the engine with a keyway. If a keyway is pictured in the listing, then it will come with one. You may also purchase a keyway from our shop here.
Proposition 65 WARNING(S)
WARNING: This product can expose you to chemicals including lead, DEHP and/or DINP which is known to the State of California to cause cancer, lead to birth defects and/or other reproductive harm. For more information go to www.P65Warnings.ca.gov. The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.
PRECAUSCION: Este producto puede exponerlo a sustancias químicas, como el plomo, el DEHP, y o el DINP que se conoce en el estado de California como causantes de cáncer, defectos congénitos o otros daños reproductivos. Para obtener más información vaya a www.P65Warnings.ca.gov. Los productos que vendemos no están diseñados para a ser utilizados en sistemas de agua potable y son sólo para aplicaciones industriales de agua no potable.
