The ROP Shop Electric PTO Clutch with Billet Machined Pulley & Wire Harness for Warner 5215-13
Product Description
- The ROP Shop replacement Electric PTO Clutch Assembly
- Specs - Inner Diameter: 1". Pulley Diameter: 6". Rotation Direction: Clockwise. Belt Width: 1/2" or 5/8". Cool coil technology. Replaceable pulley bearing. Super smooth "Xtreme Precision" machined pulley. Integrated water tight wire harness. Refer to images 2 & 3 for more information
- Includes - (1) Electric PTO Clutch, (1) Billet Machined Pulley & (1) Wire Harness; comes as shown in the first image
- Has a permanent magnet/spring brake system which has about a 20% better stop time than Gen.2 clutches. The friction ring's initial torque is about 15% higher than the Gen.2 clutches. Designed for rugged use. For residential & commercial applications. Torque correctly to prevent premature failure
- Spacer can be removed for applications that don’t require it or when the pulley is on the other side. The spinning pulley weight has been reduced about 50%-100% compared to Gen.2 clutches; it has lower energy, lower inertia & better dynamic balance
You can remove the spacer that’s in the shaft and move it to the opposite side. It’s a tight fit, mainly to keep the vibrations from shaking it out, so you’ll need a little bit of elbow grease to get it out and put it back in.
Please note: We would NOT recommend using a spacer that is handmade or that came off of a different machine. This would void the warranty on our clutch. If you have any further questions, contact us, and we will help you out.
You can remove the spacer that’s in the shaft and move it to the opposite side. It’s a tight fit, mainly to keep the vibrations from shaking it out, so you’ll need a little bit of elbow grease to get it out and put it back in.
Please note: We would NOT recommend using a spacer that is handmade or that came off of a different machine. This would void the warranty on our clutch. If you have any further questions, contact us, and we will help you out.